JOMOLA 17 inch Vacuum Suction Cup Shower Towel Bar for Bathroom Drill Free Kitchen Hand Towel Rack Holder Storage Hanger Stainless Steel Brushed Finish
Color: Towel Bar 17"
- SIZE OF STAINLESS STEEL HAND TOWEL BAR: The actual hanging length is 13.78 Inch/ 35cm. The total length including the suction cups is 16.85 Inch/ 42.8cm. The exact gap between the wall and the towel rack is 4.5 cm. Please measure your hand towel before buying this towel bar!
- ULTRA STRONG SUCTION ABILITY: This suction cup base made of PVC (With a certain STICKY silicone material) which has good flexibility to release air. Suction cup work by the vacuum but the sticky PVC base which can help you place the suction cups easily.
- SPACE SAVING SUCTION HOLDER DESIGN: It's perfect for a limited space. As it can to go in a small space in kitchen to store hand towels and dish towels. Heavy duty towel rail can bear 11 lb(5KG) maximum weight. Vacuum principle make bath towel bar hard to fall off.
- FIT TO FLAT SHOWER SCREEN BATHTUB DOOR: An ideal way to storage your towel after your shower. It sticks to smooth glass shower screen and holds a wet bath towel without breaking a sweat! It doesn't detach or loose under the weight of a damp towel. Waterproof dish towel rail holder can be reused after washing.
- OPTIONAL INSTALLATION WALL SURFACE: Only fix to clean, dry, flat, non-porous, shiny, smooth surfaces. Such as: glazed tiles, porcelain tiles, glass, mirror, stainless steel, plastic, acrylic, cultured marble. Surface has to be smooth for proper vacuum seal. It would not hold unless the surface is sealed to a point of stopping all air leakage. Please check again whether the wall is suitable for installation.
Publisher: JOMOLA INDUSTRY
Material: Stainless Steel
Main Color: Silver
Finish: Brushed Finish
Suction Cups Base Diameter: 6.5cm/2.56 inch
Overall Length(wall mounting length): 42.8cm/16.85 inch
Single Rod Length(actual hanging length): 35cm/13.78 inch
Suggest Max Load: 11lb (5KG)
Package Weight: 0.79 lbs (0.36KG)
Installation Method: Suction
Vacuum Suction Cup Towel Bar *1
Installation Instruction *1
Installation Instructions :
1. Check to make sure the surface you applied the suction to is clean and smooth.
2. Hold the PVC base, rotate the stainless steel knob cap in an Anti-clockwise manner until it
cannot be rotated, make sure the suction cup is in the pre-installed state.
3. Remove the plastic protective film. Make sure the PVC base is dry and clean. Place the
suction cup perpendicularly and press firmly to exhaust the air.
4. One hand hold the center of the suction cup, the other hand tighten knob cap in a
clockwise manner until fully tight to ensure successful installation.
How To Remove:
Twist the knob cap in an Anti-clockwise manner until can not rotate. Pull up on the release
tab to release the suction and remove. Wash PVC base bottom with water,
reuse it after drying.
Matters Needing Attention:
1. Suction cup work by the vacuum but the sticky PVC base which can help you place the
suction cups easily.
2.Be sure to follow the instructions on mounting. It does make a difference. Search "Suction
Cup Series Installation Step" to watch more installation videos on YOUTUBE. And there is an
instruction sheet included plus detailed instructions come with the suction.
Package Dimensions: 17.1 x 3.2 x 2.7 inches